Step 1
Activate Stikbox’s Bluetooth Mode
- Open the back panel of your Stikbox.
- Press the Bluetooth button until Power LED starts blinking.
- The Stikbox will start searching for a compatible device to pair with.
- If your phone’s Bluetooth is activated and you already have connected to your Stikbox at least once. The pairing will occur automatically.
- If the power LED does not light up then you need to charge the battery via the USB connector.
- If you never connected your phone to your Stikbox or had your devices changed, then you must pair your phone and Stikbox manually (Step 2).
Step 2:
Bluetooth Pairing
1
Tap “Settings” on your iPhone.
2
On Settings, tap on Bluetooth.
3
On Bluetooth settings:
- Turn on your Bluetooth.
- A list of devices should appear.
- Select “STIKBOX” and wait for confirmation.
Step 3
Activate Phone Bluetooth mode
If you have just followed “Step 2” then your phone’s Bluetooth is already activated.
There are 2 ways to activate your phone’s Bluetooth mode.
Use the Control Center of your iPhone.
- Swipe up from the bottom edge of your screen.
- Tap on the Bluetooth icon.
Step 4:
Extend the Selfie Stick
Holding the last bar, slide it down to extend the selfie stick to its maximum reach.
Push the stick towards the opposite direction of your phone. – Adjust the phone tilt. – Hold the last bar of the stick, use your index finger to press the Bluetooth trigger and take your selfie!